RUBBERGARD™ EPDM ROOFING MEMBRANE

Unroll the future of roofing

DURABLE EPDM ROOFING FOR SUPERIOR WATERPROOFING

The waterproofing market has been changing during the past few decades, with single-ply roofing membranes steadily gaining market share. Product durability, ease of application and ability to optimize the energy efficiency of buildings while minimizing their environmental impact are key factors behind this trend. RubberGard EPDM roofing membrane ticks all these boxes. RubberGard EPDM is a synthetic rubber single-ply waterproofing membrane for flat and low slope roofs of commercial, industrial and residential buildings. It offers outstanding durability, resilience and adaptability to current and future building needs. Unlike other traditional roofing membranes on the market, the installation of RubberGard EPDM is flame-free, making onsite working conditions safer. Being a single-ply membrane, it offers a lightweight roofing solution that is quick and easy to install.
FEATURES AND BENEFITS

Long service life

Total peace of mind for a very long time, that is what the RubberGard EPDM roofing membrane has to offer. Properly formulated EPDM membranes show an unmatched resistance to ozone, UV radiation and extreme temperatures. As they do not contain any plasticizers or flame retardants, their characteristics remain stable and unchanged over time. Studies show that EPDM roofing membranes have a life expectancy of more than 50 years.

Quick and easy installation

The RubberGard EPDM roofing membrane is easy to install. It is available in large seamless sheets up to 15.25 m wide x 61 m long (930 m²), resulting in fewer field seams needed for large surfaces and a shorter installation time. Elevate's QuickSeam tape technology offers a proven field seaming solution without requiring sophisticated or costly equipment.

High flexibility and elongation

RubberGard EPDM remains highly flexible, even at temperatures as low as -45°C, enabling year-round installation. The membrane can also elongate over 300% to accommodate building movements and temperature fluctuations.

Low-life cycle cost

RubberGard EPDM requires little or no maintenance. If needed, it can be easily repaired using Elevate QuickSeam products, even after decades of service. This feature, combined with its inherent durability and competitive installation costs, result in a very low life-cycle cost.

Ecological

RubberGard EPDM supports your sustainable efforts. It is an inert material with a low environmental impact. No toxic substances are released during or after its installation, allowing the collection of run-off rainwater for domestic use. RubberGard EPDM can also be recycled and re-used. 

Suitable for green and solar roofs

Having successfully passed the EN 1394 test for resistance to root penetration on extensive green roofs, the RubberGard EPDM roofing membrane is ideal for extensive green roof systems that use lightweight, low-maintenance sedum vegetation. You can also easily combine RuberGard EDPM with any type of PV (photovoltaic) installation thanks to its high-temperature resistance, wear and tear resistance, and unmatched life expectancy.

CHOOSING THE RIGHT ROOFING SYSTEM

Are you planning to install a new roof or refurbish an existing roof? Do you want an accessible or non-accessible roof, a green roof, a roof with solar panels, a blue roof…? RubberGard EPDM roofing systems offer a variety of installation options to best meet the requirements of your project.

  •     MECHANICALLY ATTACHED (RMA) SYSTEM

Lightweight, non-penetrating mechanically attached system developed around Elevate’s QuickSeam RMA strip. The QuickSeam RMA strips are laid over the substrate and mechanically secured to the roof deck. The membrane is then adhered to these self-adhesive strips.

  •     FULLY ADHERED SYSTEM

The membrane is fully adhered directly to the substrate using Elevate bonding adhesive.

  •     BALLASTED SYSTEM

The membrane is loosely laid over the substrate and held in place using approved ballast.

SUITABLE FOR A WIDE RANGE OF APPLICATIONS

Elevate RubberGard EPDM is fully compatible with green and solar roofs, being both robust and lightweight. It is also particularly suitable for modular construction, offering several advantages during the construction phase and throughout the service life of the finished building.

Park View

Discover

La Confluence

Discover

The TechnoBuild project is nearing completion!

On this roof we installed Elevate RubberGard EPDM membrane, an extremely durable and flexible material with a lifespan of over 75 years.
Now we apply the gravel layer, which protects the membrane and completes the system.

Price list RubberGard EPDM

SKU Weight Width Length Area Price Lei
W56LE450710 105.0 2.28 30.5 69.5 400
W56LE451010 140.5 3.05 30.5 93.0 400
W56LE45122F 336.2 3.65 61 222.7 400

QuickSeams products

Flexible enough to cover any roof. Durable enough to protect it. Guard your building with the industry's premium-grade roofing membrane
Designed to clean and prime the RubberCover EPDM membrane and/or substrate that are to receive a QuickSeam product.
QUICKPRIME PLUS
Designed to clean and prime the RubberCover EPDM membrane and/or substrate that are to receive a QuickSeam product.

Price list QUICKPRIME PLUS

SKU Quantity Weight Packaging Price Lei
W563587041EU 3.78 3.78 4 2250
W563587044EU 11.36 10.6 1 5235
Firestone Splice Tape is a self-adhesive tape for bonding EPDM membranes and butyl rubber films. Compatible with membranes from Firestone, Carlisle, and Lineflex. Please contact our sales team for compatibility with membranes from other manufacturers. This tape only works in conjunction with Firestone QuickPrime Plus (W 563587041, W 563587044).
QUICKSEAM SPLICE TAPE
Firestone Splice Tape is a self-adhesive tape for bonding EPDM membranes and butyl rubber films. Compatible with membranes from Firestone, Carlisle, and Lineflex. Please contact our sales team for compatibility with membranes from other manufacturers. This tape only works in conjunction with Firestone QuickPrime Plus (W 563587041, W 563587044).

Price list QUICKSEAM SPLICE TAPE

SKU Width Packaging Price Lei
W56RAC1603 7,62CM 6 3300
W56RAC1626 15,25CM 2 6600
Uncured EPDM strip factory‐laminated to QuickSeam tape. It is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Elevate guidelines.
QUICKSEAM FORMFLASH
Uncured EPDM strip factory‐laminated to QuickSeam tape. It is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Elevate guidelines.

Price list QUICKSEAM FORMFLASH

SKU Width Packaging Price Lei
W56RAC0650 15CM 2 6150
W56RAC1650 23CM 2 8950
W56RAC1653 30CM 1 14450
W56RAC162A 45CM 1 25200
Semi-cured EPDM strip laminated to QuickSeam tape. It is designed to flash metal roof edging profiles and other details, as specified in the Elevate guidelines.
QUICKSEAM 5" FLASHING
Semi-cured EPDM strip laminated to QuickSeam tape. It is designed to flash metal roof edging profiles and other details, as specified in the Elevate guidelines.

Price list QUICKSEAM 5" FLASHING

SKU Width Packaging Price Lei
W56RAC1615 12,7 2 11750
Non-reinforced 1.5 mm thick RubberGard EPDM membrane, fully laminated to QuickSeam tape. It has a polyester release liner for easy removal and excellent weather resistance. It can be used to easily flash details where cured EPDM is required or preferred: curbs, parapets, gutters, general roof repairs, drain and pipe flanges.
QUICKSEAM 18" FLASHING
Non-reinforced 1.5 mm thick RubberGard EPDM membrane, fully laminated to QuickSeam tape. It has a polyester release liner for easy removal and excellent weather resistance. It can be used to easily flash details where cured EPDM is required or preferred: curbs, parapets, gutters, general roof repairs, drain and pipe flanges.

Price list QUICKSEAM 18" FLASHING

SKU Width Packaging Price Lei
W56RAC1620 45CM 1 18000
Strip of RubberGard MAX Reinforced EPDM membrane with QuickSeam tape factory-laminated to it along one edge. It is used for non-penetrating base tie-ins, as described in the Elevate guidelines.
QUICKSEAM REINFORCED PERIMETER FASTENING STRIP
Strip of RubberGard MAX Reinforced EPDM membrane with QuickSeam tape factory-laminated to it along one edge. It is used for non-penetrating base tie-ins, as described in the Elevate guidelines.

Price list QUICKSEAM REINFORCED PERIMETER FASTENING STRIP

SKU Width Packaging Price Lei
W56RAC1632 15,24CM 2 9400
Strip of Elevate RubberGard EPDM MAX reinforced membrane with two QuickSeam tape strips factory-laminated to it along its length. It is used for non-penetrating RubberGard EPDM membrane attachment, as specified in the Elevate guidelines.
QUICKSEAM RMA STRIP
Strip of Elevate RubberGard EPDM MAX reinforced membrane with two QuickSeam tape strips factory-laminated to it along its length. It is used for non-penetrating RubberGard EPDM membrane attachment, as specified in the Elevate guidelines.

Price list QUICKSEAM RMA STRIP

SKU Width Packaging Price Lei
W56RAC1610 25,4 1 9550
Semi-cured EPDM strip laminated to QuickSeam tape. It is used to cover and seal batten strips which are installed over the membrane, as specified in the Elevate guidelines.
QUICKSEAM BATTEN COVER STRIP
Semi-cured EPDM strip laminated to QuickSeam tape. It is used to cover and seal batten strips which are installed over the membrane, as specified in the Elevate guidelines.

Price list QUICKSEAM BATTEN COVER STRIP

SKU Width Packaging Price Lei
W56RAC1616 15,24 2 13100
Specifically designed to be used around small pipe penetrations, clusters of pipes, l-beams, etc.
QUICKSEAM PENETRATION POCKET KIT
Specifically designed to be used around small pipe penetrations, clusters of pipes, l-beams, etc.

Price list QUICKSEAM PENETRATION POCKET KIT

SKU Quantity Diameter Price Lei
W56RACQS06 6KIT 152MM 2150
W56RACQS10 6KIT 254 3625

Adhesive & cleaning agents

Our adhesives and cleaning agents are designed for bonding and cleaning the UltraPly TPO membrane.
Solvent-based contact adhesive specifically designed for bonding RubberGard EPDM membranes to approved insulations, in addition to wood, metal, masonry and other acceptable substrates.
BONDING AGHESIVE BA-2012
Solvent-based contact adhesive specifically designed for bonding RubberGard EPDM membranes to approved insulations, in addition to wood, metal, masonry and other acceptable substrates.

Price list BONDING AGHESIVE BA-2012

SKU Quantity Weight Price Lei
W56RACQS06 10L 9,7 3780
W56RACQS10 20L 18,3 7350

Sealants

Use our selection of sealants to ensure a completely watertight installation
Designed to provide a watertight seal when used in compression at drain and scupper details, wall terminations, and other details, as specified in the Elevate guidelines.
WATER-BLOCK SEAL (S-20) - GARNITURA BLOC DE APĂ (S-20)
Designed to provide a watertight seal when used in compression at drain and scupper details, wall terminations, and other details, as specified in the Elevate guidelines.

Price list WATER-BLOCK SEAL (S-20) - GARNITURA BLOC DE APĂ (S-20)

SKU Quantity Weight Packaging Pallet Price Lei
W563587071E 25 12,25 25 80 245
Designed to seal and mechanically protect the exposed edges of QuickSeam products where required, as per Elevate guidelines. It can also be used as a general-purpose sealant in other applications, as specified in the Elevate guidelines.
LAP SEALANT HS
Designed to seal and mechanically protect the exposed edges of QuickSeam products where required, as per Elevate guidelines. It can also be used as a general-purpose sealant in other applications, as specified in the Elevate guidelines.

Price list LAP SEALANT HS

SKU Quantity Weight Packaging Pallet Price Lei
W56358703E 25 12,25 25 80 265

Plates, fasteners & tools

Our plates and fasteners are used to mechanically attach the UltraPly TPO membrane, roofing system and/or insulation boards. Please, also discover our range of tools to ensure a quality UltraPly TPO installation.
Firestone - Plastic Quickscrubber Handle with gripper teeth on the bottom - Priced and Sold by the Each - Use with the 3
QUICKSCRUBBER HANDLE
Firestone - Plastic Quickscrubber Handle with gripper teeth on the bottom - Priced and Sold by the Each - Use with the 3" x 6" Scrubber pads - see below under Recommended accessories.

Price list QUICKSCRUBBER HANDLE

SKU Quantity Price Lei
W563582056 40 185
High quality replacement pad for Elevate's QuickScrubber Handle. Used for smooth, even application of EPDM primer.
QUICKSCRUBBER PAD
High quality replacement pad for Elevate's QuickScrubber Handle. Used for smooth, even application of EPDM primer.

Price list QUICKSCRUBBER PAD

SKU Quantity Price Lei
W563582057 100 16
Used for the application of the QuickPrime Plus primer.
QUICKSCRUBBER KIT
Used for the application of the QuickPrime Plus primer.

Price list QUICKSCRUBBER KIT

SKU Quantity Price Lei
W563582045 4 HANDLE/30PADS 1125
Used for the application of the QuickPrime Plus primer on upstands.
QUICKSCRUBBERPLUS STAND-UP TOOL KIT
Used for the application of the QuickPrime Plus primer on upstands.

Price list QUICKSCRUBBERPLUS STAND-UP TOOL KIT

SKU Quantity Price Lei
W563582049 4 HANDLE/20PADS 2575
Used for rolling QuickSeam accessories.
SILICONE RUBBER ROLLER
Used for rolling QuickSeam accessories.

Price list SILICONE RUBBER ROLLER

SKU Quantity Price Lei
W563582023 6 1250
X
Submit a request for a product
Your name
Your phone
Your request was sended with success
It was some error while sending request